Oak internal doors in Newcastle, supplied & fitted
Real oak doors, measured and hung by local fitters. We supply engineered and solid oak in Shaker, panelled, cottage and glazed styles, with matching frames, architrave and handles.
- Engineered or solid oak
- Pre-finished or unfinished
- Oak FD30 fire doors
Oak internal doors for Newcastle homes
Oak internal doors are the most common request we get in Newcastle, and they suit more houses than people expect. The warm grain sits well in a Victorian terrace in Heaton or Jesmond, and it softens the plain walls of a new build in Great Park or Killingworth.
We supply and fit oak doors across Newcastle, Gateshead, North Tyneside and the wider North East. You can buy the doors through us, or we can hang oak doors you have already bought. Either way, you get a fixed, itemised quote before any work starts.
Engineered vs solid oak: which should you choose?
Most oak doors sold today are engineered. They have a stable core, usually laminated timber or a dense composite, faced with a real oak veneer and solid oak lippings on the edges. You still see and touch genuine oak, but the core resists the twisting and bowing that solid timber can suffer in a centrally heated house.
Solid oak doors are oak all the way through. They are heavier and feel more substantial when you close them. They also move more as humidity changes, so they need careful sealing and a room that doesn’t swing between damp and dry.
| Feature | Engineered oak | Solid oak |
|---|---|---|
| Stability | Very stable in heated rooms | Moves more with humidity |
| Weight | Moderate | Heavy, so it needs strong hinges |
| Look | Real oak veneer on the faces | Oak throughout, grain on every edge |
| Best for | Most homes and new builds | Period properties and high-end refits |
For most homes we recommend engineered oak. Solid oak makes sense when you want the weight and feel of traditional joinery, or when you are matching original doors in an older property.
Pre-finished or unfinished oak doors?
Pre-finished oak doors arrive with a factory lacquer or oil already applied. They can be hung and used the same day, there is no smell or drying time, and the finish is even on every face. This is the quickest and cleanest option for most refits.
Unfinished oak gives you control over the final colour. A clear matt lacquer keeps the pale natural tone, a hardwax oil gives a slightly richer look, and a tinted finish can help match existing floors or furniture. The catch is that every face and edge must be sealed, including the top and bottom once the door has been trimmed. An unsealed edge lets moisture in, and that is the main reason oak doors warp.
Tip: if you choose unfinished doors, apply the first coat within a few days of fitting and keep them away from steamy rooms until they are sealed. Manufacturers’ guarantees usually depend on it.
Oak door styles, including glazed oak
Oak works in almost any design. These are the styles we fit most often in Tyneside homes:
- Shaker: one, three or four flat recessed panels with square edges. Simple and timeless, it suits both modern and older houses.
- Panelled: four or six moulded panels for Victorian and Edwardian homes.
- Cottage and ledged: vertical boards with horizontal ledges, often paired with a thumb latch. Ideal for cottages in Northumberland and County Durham villages.
- Flush and grooved: flat faces, sometimes with routed lines, for a clean modern interior.
Glazed oak doors
Glazed oak doors bring light into dark hallways and connect kitchens with living spaces. Options run from a single glazed panel to full-length glass, in clear, obscure or frosted toughened safety glass. Our glazed internal doors page covers glass choices in more depth, and the door styles guide compares designs side by side.
Oak fire doors for loft conversions and flats
If a loft conversion creates a third storey, the doors opening onto the stairway normally need to be fire doors. The same often applies in flats and to the door between a house and an integral garage. Oak FD30 fire doors look almost identical to standard oak doors, so you don’t have to give up the style you want.
Oak fire doors are 44 mm thick rather than the standard 35 mm, and they only perform as tested when fitted with the right intumescent strips, hinges and gaps. We fit them to the manufacturer’s instructions and always suggest confirming your exact requirements with building control. Our fire doors page explains the rules in more detail.
Matching oak frames, architrave and handles
New oak doors can look out of place against tired painted frames. We can supply and fit oak linings, architrave and skirting so the whole opening matches, which also gives us a square, true frame to hang the door in. Read more about our frames, linings and architrave service.
Matt black, satin brass and brushed nickel handles all sit well against oak. Solid oak doors go on three heavy-duty ball-bearing hinges as standard, and we fit latches and handles to suit the style of door. Browse handles and hardware for ideas.
How to care for oak internal doors
Oak is easy to look after once it is properly sealed. Dust with a soft dry cloth and wipe off marks with a slightly damp one, then dry the surface. Avoid spray polish, bleach and abrasive cleaners, as they can dull or strip the finish.
Fine cracks or slight movement in the first few months are normal while the timber settles into your home. Oiled doors benefit from a fresh maintenance coat every few years, while lacquered doors rarely need more than a wipe.
Oak door questions we’re often asked
Will oak doors match my oak flooring?
Oak varies in tone from batch to batch and between finishes, so an exact match is unlikely. We can compare samples against your floor so the doors complement it rather than clash.
Can you fit oak doors I have bought myself?
Yes. We offer a fit-only service. Let us know the door sizes and whether they are pre-finished or unfinished, and we will quote for hanging, hinges, latches and any frame work needed.
What sizes do oak internal doors come in?
The most common UK sizes are imperial, such as 1981 x 762 mm (6ft 6in x 2ft 6in) and 1981 x 686 mm. Metric sizes such as 2040 x 826 mm are also available. Standard oak doors are 35 mm thick and fire doors are 44 mm.
How long does it take to fit oak doors?
Most whole-house refits take one to two days once the doors have been delivered. Solid oak and fire doors take a little longer each because of their weight and the extra hardware.
You might also need
White & Painted Internal Doors
Primed doors ready for painting, or factory-finished white, grey and black doors that are ready to use as soon as we hang them in Newcastle.
Learn moreGlazed Internal Doors
Part-glazed, French and black-framed industrial doors with safety glass, a good fix for darker hallways in Newcastle.
Learn moreFire Doors
FD30 and FD60 fire doors for loft conversions, flats and rental homes in Newcastle, fitted with the right seals, hinges and closers.
Learn moreGet a quote for oak internal doors
Send us a few details and we’ll come back with a clear, itemised quote for doors, hardware and fitting. No pressure and no obligation.